Boats + Cars · Multi-year protection · Palm Beach County · 33483 / 33444 / 33435 / 33426
Ceramic Coating in Delray Beach
Professional-grade ceramic systems for gelcoat, marine paint, and automotive finishes — protection measured in years, not weeks.
Zea Detailing provides mobile ceramic coating in Delray Beach & Boynton Beach — at Delray Harbor Club Marina, Suntex Marina at Boynton Beach, Boynton Harbor Marina, and private docks in Delray Beach waterfront and Seagate — for boats and cars. Licensed, bonded and insured; based in West Palm Beach; Palm Beach County.
What it is: Ceramic coating is a professionally applied, chemically bonded layer of silica that cures into a hard, hydrophobic shell over gelcoat or automotive paint. On South Florida boats and cars it replaces wax, resists UV chalking and salt, makes washdowns faster, and lasts years instead of weeks.
Ceramic Coating on Delray Beach water and driveways
A Contender or SeaVee that runs Boynton Inlet most calm mornings comes back with salt drying on the gelcoat before it clears the jetties, and in a wet slip at Boynton Harbor Marina it collects diesel soot on top of that. Before we coat anything here we strip both layers: iron and fallout remover on the hull, clay, then a machine polish to pull chalk and dock-line scuffs out of the gelcoat. Silica bonds to clean, corrected surface only, so on an inlet boat the prep is most of the job. Powder-coated towers, outboard cowlings, and stainless get their own coating, since salt hits those first.
We run coatings in two visits. Decontamination and polish come first, usually in the boat's own slip at Suntex Marina at Boynton Beach or Delray Harbor Club Marina once we clear dates with the dockmaster, or on a lift at one of the Intracoastal estates where hose and shore power are in place. The coating goes on the next dry morning and needs hours of shade before the afternoon build-up, so we start early and ask that a lift boat stay out of the water overnight. You get written washdown guidance matched to how often you run the inlet, and we can fold it into a standing washdown plan.
What Delray Beach does to a finish
Offshore salt, run hard
Salt crust after every canyon run needs a same-week washdown before it etches metals and glass — that's the cadence we build here.
Municipal-marina dust & fallout
High-traffic marinas mean diesel soot and dust on top of salt. Regular decontamination keeps both off gelcoat and clear coat.
Tower, T-top & outboard care
Powder-coated towers, multi-outboard cowlings, and stainless need product knowledge generic washers don't carry. This is our bread and butter.
Ceramic Coating at Delray Beach marinas
We carry the insurance certificates these facilities require and coordinate directly with the dockmaster or yard.
Boutique · Mixed fleet
Delray Harbor Club Marina
Delray Beach
Full service · Center consoles
Suntex Marina at Boynton Beach
Boynton Beach
Public marina · Sportfish
Boynton Harbor Marina
Boynton Beach
How ceramic coating gets done right
- 01
Wash & full decontamination
Iron remover, chemical decon, and clay treatment strip everything bonded to the surface.
- 02
Machine correction
Single or multi-stage polishing removes oxidation, swirls, and haze — verified under inspection light.
- 03
Panel wipe & inspection
Residue-free wipe-down so the coating bonds to a bare, perfect finish.
- 04
Coating installation
Applied panel by panel in controlled sections, leveled, and checked for high spots.
- 05
Cure & handoff
Cure guidance, first-wash timing, and a maintenance plan to protect the investment.
Ceramic Coating in Delray Beach — FAQ
Good questions
How long does a ceramic coating last on a boat in Florida?
With correct prep and sensible maintenance, marine ceramic systems deliver two to five years of protection — even on hulls that live in the water. Regular fresh-water washdowns extend coating life significantly, which is why most of our coating clients pair it with a maintenance plan.
Is ceramic coating worth it over wax?
In South Florida, yes. Carnauba wax survives weeks in our UV and salt. A professional ceramic coating is a hard, chemically bonded layer that survives years, sheds salt and waterline scum, and keeps gloss you can measure.
Do you service boats at Boynton Harbor Marina and Suntex?
Yes — both are on our regular route. We carry the insurance certificates marinas require and coordinate slip access directly with the dockmaster.
Can you keep up with a boat that fishes every weekend?
That's the Boynton program: standing washdowns timed to your fishing schedule, so salt never sits more than a day or two. Coated boats rinse clean in half the time.
Should I coat the tower and outboards on my Boynton Inlet boat, or just the hull?
Coat them. Salt off the inlet hits powder-coated tower tubes, outboard cowlings, and stainless before the hull dries, and those are the surfaces that pit and chalk first. We coat them as part of the job on request, using a product matched to metal and powder coat rather than gelcoat.
My boat sits in a wet slip at Boynton Harbor Marina. Does marina soot affect the coating?
Not the coating, but it changes the prep and upkeep. Diesel soot and dust bond to gelcoat, so we run a full chemical decontamination before polishing or nothing sticks. Afterward the coating keeps fallout on the surface instead of in it, so a weekly rinse at the slip clears what a wax boat would hold.
Ceramic Coating in Delray Beach?
Two minutes to a real quote — condition, photos, location. We handle the rest.
Also in Delray Beach