Boats + Cars · Multi-year protection · Broward County · 33004 / 33312
Ceramic Coating in Dania Beach
Professional-grade ceramic systems for gelcoat, marine paint, and automotive finishes — protection measured in years, not weeks.

Zea Detailing provides mobile ceramic coating in Dania Beach — at Harbour Towne Marina, Seahaven Superyacht Marina, Derecktor Dania, and private docks in Melaleuca Gardens and Davis Isles — for boats and cars. Licensed, bonded and insured; based in West Palm Beach; Broward County.
What it is: Ceramic coating is a professionally applied, chemically bonded layer of silica that cures into a hard, hydrophobic shell over gelcoat or automotive paint. On South Florida boats and cars it replaces wax, resists UV chalking and salt, makes washdowns faster, and lasts years instead of weeks.
Ceramic Coating on Dania Beach water and driveways
A boat hauled at Derecktor Dania or sitting in a yard slip on the Dania Cut-Off Canal shares air with active sanding. Antifouling overspray and yard dust land on gelcoat, glass, and stainless, and Port Everglades Inlet traffic adds a film of diesel soot on top of it. Coating over that just seals it in, so prep here runs long: iron remover and clay on the hull sides, a machine polish to cut the chalk Broward County sun leaves on older gelcoat, then a solvent wipe before any silica goes down. Once it cures, the next drift of yard dust rinses off with a hose instead of bonding into the finish.
We coat where the boat lives. At Harbour Towne Marina that means working on the ground between forklift cycles, so we book around your launch schedule and ask the dry-stack office to leave the boat down while the coating cures. In wet slips at Royale Palm Yacht Basin, Seahaven Superyacht Marina, or Dania Beach Municipal Marina we clear access with the dockmaster, bring our own water and power, and shade the hull sides so the chemistry does not flash off in afternoon sun. Private seawalls in Davis Isles and driveways in Melaleuca Gardens get the same sequence, boat or car, and every job ends with written maintenance guidance.
What Dania Beach does to a finish
Yard dust and bottom-paint overspray
Boats on the Cut live next to active haul-outs. Sanding dust and antifouling overspray settle on gelcoat and glass; we decontaminate before it bonds, then coat so it rinses off next time.
Dry-stack forklift cycles
Racked boats at Harbour Towne come down salty and go back up wet. We wash on the ground after the pull and time visits to your launch schedule.
Port Everglades traffic and diesel soot
Diesel soot from port traffic settles on hulls and stainless along the Cut and the beach basin. Regular decontamination keeps it off dark gelcoat and metal before it stains.
Ceramic Coating at Dania Beach marinas
We carry the insurance certificates these facilities require and coordinate directly with the dockmaster or yard.
Full service · Mixed fleet
Harbour Towne Marina
Dania Beach
Full service · Mega-yachts
Seahaven Superyacht Marina
Dania Beach
Shipyard · Mega-yachts
Derecktor Dania
Dania Beach
Shipyard · Mixed fleet
Playboy Marine Center
Dania Beach
Full service · Mixed fleet
Royale Palm Yacht Basin
Dania Beach
Public marina · Mixed fleet
Dania Beach Municipal Marina
Dania Beach
How ceramic coating gets done right
- 01
Wash & full decontamination
Iron remover, chemical decon, and clay treatment strip everything bonded to the surface.
- 02
Machine correction
Single or multi-stage polishing removes oxidation, swirls, and haze — verified under inspection light.
- 03
Panel wipe & inspection
Residue-free wipe-down so the coating bonds to a bare, perfect finish.
- 04
Coating installation
Applied panel by panel in controlled sections, leveled, and checked for high spots.
- 05
Cure & handoff
Cure guidance, first-wash timing, and a maintenance plan to protect the investment.
Ceramic Coating in Dania Beach — FAQ
Good questions
How long does a ceramic coating last on a boat in Florida?
With correct prep and sensible maintenance, marine ceramic systems deliver two to five years of protection — even on hulls that live in the water. Regular fresh-water washdowns extend coating life significantly, which is why most of our coating clients pair it with a maintenance plan.
Is ceramic coating worth it over wax?
In South Florida, yes. Carnauba wax survives weeks in our UV and salt. A professional ceramic coating is a hard, chemically bonded layer that survives years, sheds salt and waterline scum, and keeps gloss you can measure.
Do you work inside the yards on the Dania Cut-Off Canal?
Yes. We service boats at Harbour Towne, Royale Palm, and Playboy Marine, and can work on the hard at Derecktor Dania and inside Seahaven with vendor approval, which we arrange through the yard office. We check in on arrival and stay clear of active lifts and work bays.
Can you detail a boat while it's on the blocks?
That is often the best time. With the boat hauled we can correct and coat the entire hull, including the boot stripe and below the waterline before bottom paint goes on. Give us the yard's window and we schedule around it.
Can you coat my boat while it is on the rack at Harbour Towne Marina?
No. Coating is done on the ground or in a wet slip, never on the rack. We schedule with the dry-stack office to set the boat down after your last run, handle decontamination, polish, and coating in one visit, then ask that it stay down until cured.
We are hauled at a yard on the Dania Cut-Off Canal for bottom paint. Coat before or after?
After. Sanding dust and antifouling overspray settle on fresh coating, and masking tape grips a coated waterline poorly. We do hull sides and topsides on your last day in the yard once sanding is finished, or right after splash at the slip.
Ceramic Coating in Dania Beach?
Two minutes to a real quote — condition, photos, location. We handle the rest.
Also in Dania Beach